A quickie van project
Posted

Full Member
Starting with a 20p toy!
Hi AllThanks to feedback on another forum my Lutons now have a representation of Translucent roofs.

Another project that was a tad more involved than I first thought was my VW van.

The main thing was to file the windscreen aperature to allow a much wider window. Another minor mod was to thin the bumper down under the doors where it forms a step and drill out the headlights.
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
'Petermac
Posted

Full Member
Progress on my White arrow van


A little comparison of where it started from.
I am hoping this might end up another signature vehicle (like my WHSmiths lorry) that spark a few memories for people.
Cheers
Jim
Last edit: by jim s-w
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Inactive Member
Do you still flatten the tyres on the bottom with sandpaper?
See, I was listening. :lol:
Max
Port Elderley
Port Elderley
Posted

Full Member
How did you raise the roof ?
'Petermac
Posted

Full Member
The below pic shows the work done to the LWB van.

The roof is simply 60 thou plasticard overlaid with microstrip and filled and sanded round the edges
Hth
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
Been tidying up a few loose ends of stuff thats been OMWB for a long time. So long that I forgot all about this one!

Another ford cargo combined out of a Corgi Cab, base toys chassis, unknown wheels and a body made using the Hornby Curtain sided van sides.
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member

Mk3 Transits from the MBC kits. These would have been really new in my era so the weathering is very light.
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
A before and after shot showing what can be had from the toybox.

In this case the Corgi mobile shop, narrowed, fitted with new wheels and the sides filled in to produce something more like a Mercedes 307D
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
A few more lorries for you

Another Dodge commando from a modified matchbox cab and a Base toys Leyland FG

A Base toys Roadtrain converted to a Freighter - below is how the cab was chopped up

This was re-assembled then the back cut off to loose the small window. a spot of filler and some sanding and its done.
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member

Austin Maestro from the 3D print from Paul Burkitt-Gray For more on the evolution of this model see http://www.rmweb.co.uk…-cad-3d-printing-project/
This next project was a bit of a suck it and see one - the Ford Sierra from the Hornby (um) thing. Suck it and see because it it didnt work out its no big deal. Below is what I came up with (with an original for comparison)



Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Legacy Member
Posted

Full Member
Below, another mini adventure again using Corgi Mini's

On the left, the corgi mini with wheels and radiator grill from a springside kit I picked up cheaply and on the right a van I am converting to a clubman estate. I just need to find another springside clubman kit going for next to nothing. This one also has wheels from Springside.
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
Finished the modernised mini (if you can call something about 30 years old modernised), its shown here compared with the original version

As an aside this is Halfords ford signal yellow which is supposedly a good match for Warning panel yellow - as you can see its no where near.
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
My friend had an 'oval' so i have attacked the oxford beetle.

So far I have filed off the canvas roof, added a small bit of filler to the upper windscreen corners (the windscreens seemed rounder on the oval beetles) and filed off the indicators. the rear window was glued and filled and an oval cut into it (needs a bit more filler yet). Luckily the oxford beetle has the smaller tail lights as per my friends car.
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
Too right Jim - officianados of the marque will be watching like hawks - don't forget the very early models had the speedo in kms/p/h……………………………:lol::lol::lol::lol::lol:Now I am really asking for trouble - the VW beetle!
……………………………………..
Your model looks very much like an oval beetle to me …………….:thumbs:thumbs
'Petermac
Posted

Full Member
Hi All
A while ago there was a discussion (over on RMweb) about the Dodge Commer and mention made that the EFSI one is 4mm scale. So, suitably inspired I tracked one down and have produced this!
![]()
Along with the obligatory wheel swap I filed off the rear wheel arches and repositioned them lower down. I also changed the radiator and bonnet to represent a Diesel engined version. I wanted to try out an idea I had to reproduce the effect you get when old lettering is removed after a long time. So I printed out a logo in a very slightly darker red on transfer paper and then applied it to the model AFTER i had weathered it. Quite pleased with the result!
Cheers
Jim
Looks very nice, but depending on the colour the letters usually (once removed) are going to be either darker like in your pic or will be lighter (if reciently repainted in a darker colour when before the lettering was on a lighter colour), either way it looks fantastic and I can't wait to try something like this my self!! great work guys!!
On a different note, I am thinking of trying a project my self, but I would like to know how hard would it be to makke a car (or van) or two liik like they had a minor fender bender or somethign like that (think winter time cars sliding on ice and rear ending another at 15MPH or so)?? how hard would it be?
Last edit: by Jim S
Posted

Full Member
Ive added some thoughts on Oxfords Transporter to my work bench

For more see http://www.p4newstreet.com/category/workbench
Cheers
Jim
Jim Smith-Wright
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Rule 1 - Model what you really see and not what you think you know!
www.p4newstreet.com
Posted

Full Member
Doug
'You may share the labours of the great, but you will not share the spoil…' Aesop's Fables
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
1 guest and 0 members have just viewed this.