Oil Burning 2884 class
Posted
#240273
(In Topic #13304)
Full Member
3D printed oil tank
Hi Everyone,A year or so ago I posted an inquiry about converting a GW loco to oil burning:
http://yourmodelrailway.net/view_topic.php?id=14189&forum_id=13
While the solutions suggested in that post were valid, they weren't exactly the easiest or most accessible options.
Enter the use and my second venture into 3D printing, my latest project: Converting a Coal burner to an Oil burner, specifically a Great Western 2884 class.
The idea behind this came up when I purchased a second hand Hornby 2884 from a local modeller who had taken the DCC socket out, so it was cheap but nothing was wrong with it apart from a hole in the tender and the need to hard-wire the decoder.
It was the right livery for the era the oil burners existed so I went for it. The tank and filler hose was from Shapeways (3D printed) and painted (by me), it is currently just sitting in the tender but will probably be glued. Plus a few more things need to be done to it like renumbering, adding a cab side sheet, fitting the supplied details and a little weathering but I'm happy with the results so far.
The beginning of the project, the Hornby 2884 no. 3803.
The 3D printed tank and filler hose.
The 3D printed tank in the loco before painting.
The painted tank.
The painted tank and filler hose sitting in the loco.
A birds eye view.
A rear view.
The loco by the way is no. 3803 which was never an oil burner so it will be numbered to 4855 (3813) which was the only one of the class to be based at Laira during this time which is the closest shed to where I'm modelling. Question, this particular loco had the route and power classification on the cab window side sheet which I will need to add. Does anyone know if someone like Fox transfers have GWR power classification discs?
Regards Connor
CC Weathering Services: https://ccgwr1.wixsite.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
Posted
Full Member
:cheers
Jeff Lynn,
Amateur layabout, Professional Lurker, Thread hijacker extraordinaire
Amateur layabout, Professional Lurker, Thread hijacker extraordinaire
Posted
Full Member
Marty
Posted
Full Member
Cheers Marty,I’m afraid I dont know Conner but you can always ask them…or get some transfer paper to go in your printer and print your own. Did you do the CAD model of the oil tank yourself? It looks great.
Marty
The printer may have to be a last resort as we don't have a working colour one at the moment, good suggestion though.
As far as the tank and filler hose goes, no, they are not my design but they are from 'Stafford Works' shop I think, it is in the list of Shapeways shops in the 3D printing forum page if you are interested. Not sure any of those designs would fit your N gauge locos though, haha .
Regards Connor
CC Weathering Services: https://ccgwr1.wixsite.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
Posted
Full Member
I don't model GWR but notice that Modelmaster list a number of GWR loco transfers in their range including coloured discs and numbers. I thought that the coloured discs were for route restrictions but I will be happily proved wrong by a GWR modeller!!
Hope that helps
Barry
Shed dweller, Softie Southerner and Meglomaniac
Posted
Full Member
Power and Route. The disc colour indicated route restriction and the number within the disc powerHi Connor
I don't model GWR but notice that Modelmaster list a number of GWR loco transfers in their range including coloured discs and numbers. I thought that the coloured discs were for route restrictions but I will be happily proved wrong by a GWR modeller!!
Hope that helps
Barry
The conversion looks great……very tempting……need to check if they got to the NW
Posted
Legacy Member
I have recently considered getting a 3D printer even the wife suggested it , But i do wonder with all these small companies offering railway parts like you have just got is it worth the effort of learning how to use one and printing it yourself.
Brian
OO gauge DCC ECOS Itrain 4 computer control system
Posted
Full Member
Having said that, I expect, in the not to distant future, technology to catch up and price to come down and a viable modelling home printer to arrive. Then I’m in.
Marty
Posted
Full Member
Correct John and Barry, Sorry I did mean exactly what you two said with the discs being route restriction and letters being power classification I just did not indicate that.[user=2006]Barry Miltenburg[/user] wrote:Power and Route. The disc colour indicated route restriction and the number within the disc powerHi Connor
I don't model GWR but notice that Modelmaster list a number of GWR loco transfers in their range including coloured discs and numbers. I thought that the coloured discs were for route restrictions but I will be happily proved wrong by a GWR modeller!!
Hope that helps
Barry
The conversion looks great……very tempting……need to check if they got to the NW
John, the Great Western Archive indicates the sheds that the 2800/2884s were based at 1947 and also indicate which members of the class were oil burners although I had a quick look and it seemed the oil burners shedded closest North Wales was Llanely and Ebbw Junction although neither are particularly close to Granby. Maybe you could have one that was based at Old Oak Common and justify it on a loco coal train or the like.
Great Western Railway, 2800 class details, 2800 - 2883
Great Westburyern Railway, 2884 class details, 2884 - 3866
Regards Connor
CC Weathering Services: https://ccgwr1.wixsite.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
1 guest and 0 members have just viewed this.