Scalescenes Canal Wharf Boxfile Layout

Post

Posted
Rating:
#250750 (In Topic #13783)
Ed
Avatar
Site staff
Ed is in the usergroup ‘Super-moderators’

My attempt

Well, I've made a start  :lol:

Had to boot the laptop into Windows to get Adobe reader working and load the print drivers for the printer.

I normally use Linux, but Adobe decided some years ago to stop publishing Adobe Reader for Linux, and knowing how precise these kits are, I didn't want to use the Linux Adobe Reader look alike clone versions as the dimensions may well have been out.

The document spring and clasp were held in by why looked like some sort of rivets, and I had to resort to drilling them out.



(please ignore the dead plants behind the chair)

When I removed the front, each side had what I can only describe as posts which came away as well.

This left the base about 5mm proud of the sides.

Looking at John's instructions they should be flush, so it was either a case of trimming the base or sticking the 'posts' back on the sides (obviously box files are made different in Oz  :lol:)

I decided to glue the 'posts' back to the end of the sides………….



……. of course I could only find one. The other is in the garage somewhere but I've even looked through the rubbish sack and I can't find it.

 Ended up cutting a strip from the section cut out for the access on the right hand side. (above pic).




Needs a tidy up, bit of sanding etc, then the next job is print and fit the water surface to the front of the boxfile.



Ed

Online now: No Back to the top

Post

Posted
Rating:
#250752
Avatar
Full Member
Good start Ed…..despite the missing corner…..I thought it was just me that lost stuff like that within minutes.
I am intrigued to see what the “water” looks like. Are you spraying the sheets as they come off the printer?

Cheers

John

John
Granby III
Lenz DCC,RR&Co Gold V10 A4 Windows 10
Online now: No Back to the top

Post

Posted
Rating:
#250753
Ed
Avatar
Site staff
Ed is in the usergroup ‘Super-moderators’
I normally spray everything once it's finished John, but I'm playing by ear so we'll see how it goes.

The only thing I've printed so far is the template to cut the access hole in the box file.

I'm sure when reading through the 22 pages of instructions the other day it mentioned varnish for the water  :roll:


Ed

Online now: No Back to the top

Post

Posted
Rating:
#250754
Avatar
Full Member
Not sure who it was now but when I first started with Scalescenes I was advised to spray each sheet as it came off the printer…….and I have followed this advice ever since.
Its worth thinking about……the spray offers a degree of protection from handling both during cutting out and assembly….also aids removal of excess glue…….just a thought.

Cheers

John

John
Granby III
Lenz DCC,RR&Co Gold V10 A4 Windows 10
Online now: No Back to the top

Post

Posted
Rating:
#250756
Avatar
Full Member
I have learned to my cost…. and repeatedly… it is best to spray as you go.  Just be sure to let the ink dry first (guess how I know this!)  Likewise, I'm delighted that it isn't just me that loses things instantly either.  It's worse when I put things in a safe place and then can't remember where the safe place was!
I have never attempted one of the boxfile kits, although I have been tempted, so I am following with interest.

Michael
Online now: No Back to the top

Post

Posted
Rating:
#250759
Avatar
Full Member
[user=1338]Ed[/user] wrote:



(please ignore the dead plants behind the chair)……………………………………………………..

No I won't !!

I need to know more about them Ed - what were the 2 in the pot on the floor behind the front one ?  They look lovely dead.   :cheers

'Petermac
Online now: No Back to the top

Post

Posted
Rating:
#250760
Ed
Avatar
Site staff
Ed is in the usergroup ‘Super-moderators’
No idea Peter, the garden is my sister's department.

I only took the boxfile out in the garden as there was not enough light for a decent picture indoors.



Ed
Online now: No Back to the top

Post

Posted
Rating:
#250761
Avatar
Full Member
:mutley :mutley :mutley

Thanks Ed - tell you sister I was only joking ……………….. :thumbs

'Petermac
Online now: No Back to the top

Post

Posted
Rating:
#250845
Avatar
Full Member
I quite fancy building one of these
Online now: No Back to the top

Post

Posted
Rating:
#252388
Ed
Avatar
Site staff
Ed is in the usergroup ‘Super-moderators’
Well, absolutly nothing done on this apart from printing the water that goes right at the front.

I've had chronic hayfever all summer, followed by a chest infection and now I've recovering from some sort of stomach bug.

Not a great summer, even without the current pandemic threat.

Doubly annoying, as I treated myself to a Macbook to print out the kit, amongst other things.

The Acer Aspire I bought just over a year ago was gettting slower and slower in Windows 10 even though it has 8Gb of memory, the last Windows 10 update taking some four hours.

Although I had Linux (Ubuntu Mate) installed as well, Adobe stopped produng a version of their Reader for Linux some years ago, so you have to use a third party PDF viewer.

Also the Linux print drivers being generic, print out the Scalescenes kits the wrong size and colour (guess how I know).

All being well, hopefully in the next week or so I'll get going again.



Ed
Online now: No Back to the top

Post

Posted
Rating:
#252389
Avatar
Full Member
Hi and what a rotten summer you've had to endure Ed. So sorry you've had to suffer so much, but thankfully it seems to be almost over now.

Good luck for the remainder of your recovery and some modelling can only help improve your outlook of life, the universe and everything.

I'm really looking forward to your Scalescenes box file build and I even bought a can of not too smelly hair spray this week to protect some Scalescenes sheets.

Best,

Bill

At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
 
Online now: No Back to the top

Post

Posted
Rating:
#252391
Ed
Avatar
Site staff
Ed is in the usergroup ‘Super-moderators’
[user=1814]Longchap[/user] wrote:
I even bought a can of not too smelly hair spray this week to protect some Scalescenes sheets.

Thanks Bill.

Not tried hairspray.

 I bought Humbrol Acryic Spray, but it's not cheap.

I have bought cheap general prurpose spray matt varnish from fleabay in the past.

Although it works ok, if you spray too much on it can bleach the paper.

Hence buying Humbrol this time round.

Begs the question, what does everybody else use.


Ed

Online now: No Back to the top

Post

Posted
Rating:
#252393
Avatar
Full Member
Krylon matt acrylic spray. I also use it for home-made decals/transfers.

Nigel

©Nigel C. Phillips
Online now: No Back to the top

Post

Posted
Rating:
#252394
Avatar
Full Member
Lidl do an own brand waterproofing spray - under the W5 banner.
Doug (Chubber) of this parish told me about it and it does work.  I presume I'ts available in their UK stores.



'Petermac
Online now: No Back to the top

Post

Posted
Rating:
#252395
Full Member
I did a boxfile earlier in the year. I look forwards to watching the progress. 
Online now: No Back to the top

Post

Posted
Rating:
#253061
Ed
Avatar
Site staff
Ed is in the usergroup ‘Super-moderators’
Won’t get much from me for the present, laid up in hospital.
Legs mobility problem again and some sort of infection 


Ed
Online now: No Back to the top

Post

Posted
Rating:
#253062
Avatar
Full Member
So sorry to hear your news Ed and you have all our thoughts for your recovery.

Hope the food's not too bad!

Rest, be well and come back to us soon.

Best,

Bill

Last edit: by Longchap


At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
 
Online now: No Back to the top

Post

Posted
Rating:
#253071
Avatar
Full Member
May I join Bill in sending my very best wishes for a speedy recovery Ed.

As it's a leg mobility problem, at least the nurses will be safe for a while …………………………. :roll: ;-)

'Petermac
Online now: No Back to the top

Post

Posted
Rating:
#253082
Full Member
Get well soon Ed. :thumbs
Terry
Online now: No Back to the top

Post

Posted
Rating:
#253093
Avatar
Full Member
I am so sorry you are not feeling so good Ed. Best wishes for a speedy recovery

John

John
Granby III
Lenz DCC,RR&Co Gold V10 A4 Windows 10
Online now: No Back to the top
1 guest and 0 members have just viewed this.