southall 00 update
Posted
#167767
(In Topic #9551)
Inactive Member
wiring
The progress has been slow but sure and I have finished the connecting wires between all the base boards all 1126 of them.My next task is supply power to all running lines plus wire up the double slip.If any kind soul that lives near to Southall could help I will show my gratitude by feeding you and keeping you supplied with plenty of tea or coffee.I have to find a room big enough to set the layout up in its entirety.what would be the ideal height for the layout? I am thinking of making legs of 36 inches,any thoughts or suggestions would be appreciated.thank you and happy new year to you all
alan:cheers
A K Worthington
Posted
Guest user
I can sympathise with you there. I am on the same task at the moment. I took a break and moved onto other things for a wee while as it gets quite intense.
Track feeds, motor and accessory feeds, frog polarity wires, LED's and the yard lights and all other manner of electrical gizzmo's. You begin to lose the will to live and need to keep coming up with positive thoughts to stop you from going completely mad.
As far as baseboard height goes, I suppose it depends on your height and the level that you find comfortable working at. Will you be seated when operating the layout, how tall are you etc. I don't think there is one solution that fits all. My Layout is about 3 feet to the top of the baseboard but I am quite short, 5 foot 6 or so.
Sorry there is no definitive answer for you but I'm sure you'll find what works best for you eventually. As far as the wiring goes, I hope you find a kind hearted soul who lives near enough to " share your experience ".
Cheers for now
Toto:thumbs
Posted
Inactive Member
i am 5 11 and i hope to get a couple of high chairs/stools. i have downloaded 2 how to wire a layout manuals but i am not that confident with complex wiring especially for a double slip. the simpler the wiring the more i will understand how to repair it if there are problems.all the best for the new year
alan
A K Worthington
Posted
Inactive Member
Take it one at a time. Do you want to do the double slip wiring first?
The frogs are at the top and the four circles represent the double pole, double throw switches attached to the turnout motors.
Notice that the turnout motors switch the frogs furthest from them.
Max
Port Elderley
Port Elderley
Posted
Guest user
It took me awhile to get my head round some of the wiring as well. Like you say, especially double slips and the like. I will do my best to explain my understanding of it. The best source for these issues is Sol if he is about but meanwhile here goes.
The double slip has four prewired wires coming from it when you take it out the box.
Two come from the middle ( or the waist of the slip ) and the other two come from either end .
The two that come from the middle, one either side of the track, to my belief is used as a track feed. Obviously one live and one return. These will be wired ( to the live or return side of the track ) depending on how the track at either side of the slip is wired. Ie all lives to the outside and all returns to the inside ( or vice versa ).
The other two wires are your frog polarity wires. You will know that 2 motors are required to operate each of the slips ( one at each end or throw bar ).
What you have to remember with these is that the frog wire from one end, gets connected to the motor at the other end.
I can maybe try and draw this out for you with some text to explain what I mean as I know that it can be difficult to envisage.
I am having my folks arriving within the next hour or so, ( mummies birthday today ) so it maybe either later today if I can get time or tomorrow night as I am working during the day.
Failing that, you never know, someone else may beat me to it as you'll probably find several people will be a reading your thread.
Meanwhile, don't let the slips worry you, continue on with the rest and by all means, lay your slips as normal as you can always come back to the wiring .
I'll catch up again when I get the chance, meanwhile have fun.
Cheers
Toto.
PS you will also need to use insulated rail joiners. Usually at the four inner rail joints but I use them for all the tracks coming of the slip as I have separate feeds to each of the tracks joining onto the slip.
Posted
Guest user
Missed your reply. I'm forgetting your electrical wizardry.
You will be able to explain it better than me.
Cheers
Toto
Posted
Inactive Member
cheers
alan
A K Worthington
Posted
Inactive Member
thank you
alan
A K Worthington
Posted
Full Member
You might find 36" a bit low……both from a viewing/operating aspect and the inevitable trips underneath to sort out problems……….it might be worth doing a few mock ups to work out what works best for you.
I am 6' 1" and Granby is set at 52"………..viewing is more realistic (less birds eye), access undeneath is ok (although I try to avoid it!) ………the one downside of increased height can be accessing the rear of the layout…..depending on the width of the baseboard
Good luck with the wiring……..Vancouver-Southall is a bit of a stretch
Last edit: by John Dew
Posted
Inactive Member
It's like two turnouts laid over the top of each other. As long as we keep in mind that the switches attached to the throw bar motors operate the frog on the opposite side to them, it's pretty straight forward.
Max
Port Elderley
Port Elderley
Posted
Guest user
Go at your own pace and if you can't get your head around it then keep asking. It will eventually sink in.
Max,
Cheers , I'm that confident with my own words that the two double slips on my layout are not actually wired yet. Well they are wired, but not connected :
Cheers for now.
Toto
Posted
Inactive Member
thank you
alan
p.s by the time you get here the tea will be cold
A K Worthington
Posted
Full Member
I'll leave slip wiring to the experts (but read along myself so I don't have to ask the same questions at a later date …..:oops:) but, regarding baseboard height, I think it's all been said.
It depends how tall you are, how long your arms are and what position you intend to operate from.
I like to view things from "low down" to get a better view of the layout - as John said, less of a bird's eye view. Also, extra height allows easier access underneath. I don't care how much planning and forethought you put in, as sure as eggs is eggs, you'll need to access the knitting under the boards at some stage, so make it easier from day 1. Again as John said, you do need to access the rear of your boards so be sensible - the higher they are, the more restricted your reach will be.
I'd suggest you experiment with some kind of mock-up. Put a board on a couple of cheap trestles and raise or lower it until it seems right for you. I think mine are roughly around 40 inches but I could be wrong - I know I was once !!! ;-);-)
'Petermac
Posted
Inactive Member
here are 2 pics of a baseboard with legs temporarily in place. leg length 105cm or 42inches roughly.
comments welcome as always
happy new year to all
alan
A K Worthington
Posted
Site staff
Regards
Alan
Born beside the mighty GWR.
Alan
Born beside the mighty GWR.
Posted
Guest user
Certainly looks the part. If you are comfortable with the height for your use, then your on a winner.
Phase 1 complete.
Cheers
Toto
Posted
Inactive Member
regards
alan
A K Worthington
Posted
Inactive Member
regards
alan
A K Worthington
Posted
Site staff
I wish mine were as high Alan, but due to other requirements in the garage they are around 35 inches.toto, due to an old back problem i found my previous layouts a little low,as this is a lot higher it will take a while to get used to. On the practical side its easier to get under and fix faults.
regards
alan
I have a similar problem and I'm not looking forward to working under them.
You can always get an adjustable height office chair to be able to sit at a comfortable level.
Ed
Posted
Guest user
What's the next item on the agenda ? Have you got any idea as to how your track plan will be panning out ?
Look forward to hearing your thoughts.
Cheers
Toto
1 guest and 0 members have just viewed this.