The DooferVac
Posted
#87021
(In Topic #4743)
Full Member
Savin' pennies.........
Herewith some pictures of my DooferVac attachment. As I am brassed off with sifting through the dust-bag of SWMBO's vacuum cleaner for clear rail joiners and small screws that I failed to see at the last moment I decided to have a go at this, especially as I'm soon to try some ballasting.Self explanatory, save to say that the 'filter' is the inside layer of a disposable face mask and the whole is fastened together with 2-part epoxy adhesive.
The only modification needed was to cut and glue on a deflector so that stuff didn't impinge straight onto the filter medium and block it up. In use, ballast doesn't cause any problem, but sawdust and fluff is best emptied out before the ex-black pepper-corn pot is more than half full.
I hope this inspires someone else to save pennies and ballast!
Doug
Last edit: by Chubber
'You may share the labours of the great, but you will not share the spoil…' Aesop's Fables
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
Posted
Guest user
well done
Brian
Posted
Legacy Member
Posted
Full Member
As it is primarily designed to help with the ballasting malarkey, why not call it a 'Ballasting Vacuum Attachment'?
That way it should pop up when searched by 'Vacuum' or 'Ballasting'…..
Doug
'You may share the labours of the great, but you will not share the spoil…' Aesop's Fables
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
Posted
Legacy Member
Posted
Guest user
I don`t see a motor or switch.
ooops, just re-read the post, hoover attachment !!! got it now.
:oops::oops::roll::cool:
Posted
Full Member
OT: Some years ago I worked on a hair cutting machine which would attach to an electric drill and a vacuum cleaner.
I never overcame the problem of hair tending to wind painfully around the spindle of the cutters.
I should have turned the manufacture over to you, Doofer.
Last edit: by ddolfelin
Posted
Guest user
The idea is you push onto the end of your ordinary hoover nozzle
Brian
Posted
Full Member
'
Posted
Site staff
Regards
Alan
Born beside the mighty GWR.
Alan
Born beside the mighty GWR.
Posted
Full Member
When cleaning up on my layout or workbench I use a piece of fine cloth which I fix into place with elastic bands over the end of the vacuum cleaner.
The DooferVac ( subject to patents pending ) looks like a good alternative approach.
Last edit: by gdaysydney
Posted
Banned
Fantastic adaptation for the old vacuum cleaner.
Cheers, Gary.
Posted
Full Member
Yes, the old 'stocking over the hoover nozzle' is a good dodge too, but SWMBO can no longer lift her leg that high……….
At least with the Doofervac, once there is a mix of ballast, fluff and dust in the container, holding it whilst running with the nozzle uppermost and giving it a shake or two will settle the ballast on the bottom and the fluff etc can be carefully hoovered out of the top of the container with the hoover pipe!
Doug
'You may share the labours of the great, but you will not share the spoil…' Aesop's Fables
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
1 guest and 0 members have just viewed this.