Heljan Container Terminal
Posted
#219064
(In Topic #11938)
Inactive Member
Aust Post delivered a parcel today . The wife said , go and get that set up .
Opening the box , I found a Heljan Container Terminal . ( I have been drooling after one for years ).
After setting it up , nothing worked . After cleaning the wheels and track , the travel now works .
I have now dismantled the entire gantry , and found that the motors run , and look new .The wires
from the gantry to the carriage rails were broken , the wires to the magnet ,and hoist were also broken .
Finally one of the cables to the hoist was frayed almost through .
I have replaced two of the four cables for the hoist, with two still to go .
I will also replace all the wiring .
The advert , described the terminal as having been used as a static model . the only fault being a missing
hand rail . In fact there were two other hand rails missing and one broken. the cabin was separate in the
bottom of the box , with the spotlight wires torn from the plug in the cabin . Also the end sections of the base
are missing .
I found a very useful guide on the internet , for replacing the cables , and the procedure for assembly .
Looks like I will be busy for a while .
IF any body has the end sections of the base that are not wanted . Send an Email .
Regards Ted
Posted
Inactive Member
I had to do a repair on a Heljan turntable. I emailed Heljan and they sent me out a new set of drive gears free of charge.
They even paid the postage.
Worth a try.
Max
Port Elderley
Port Elderley
Posted
Inactive Member
Thanks for the tip , as far as I can determine , I can not see any problem with the
mechanicals . I have the cord for the cables. It was brown but now I have changed the colour
with a permanent marker pen . The only other requirement is electrical wire. Ethernet wire is
Ideal . Also I would like to regrease the gears and bearings. I will have to research for a suitable
grade . Can you remember what type you used .
Regards Ted
Posted
Inactive Member
They also carry all of the other parts.
I use Atlas Gear Lube.
Max
Port Elderley
Port Elderley
Posted
Inactive Member
Thanks for the reply . On other forums complaints have been made
about NO parts being available .
I assumed you had just been lucky in obtaining your gear sets.
I will send them an Email , and see if they have any of my missing parts
Regards Ted
Posted
Inactive Member
Max
Port Elderley
Port Elderley
1 guest and 0 members have just viewed this.