Barnstable
Posted
Guest user
One station of the Devan & Summersett
Doug EasyGet Shelagh to do the polyfilla job you can then blame her for the mess then
Brian
Posted
Guest user
Doing that road is fun indeed, more to do of course once I fiunshed that bit of trackwork.
Posted
Guest user
I assume your lift up is only used when you dont feel up to ducking under it or if you have visitors.
Plus you should not be blaming yourself for the mess that is what Mobo is there for
Brian
Posted
Guest user
Most of the time it is up unless I am running around & around.Ron
I assume your lift up is only used when you dont feel up to ducking under it or if you have visitors.
Plus you should not be blaming yourself for the mess that is what Mobo is there for
Brian
Posted
Full Member
CC Weathering Services: https://ccgwr1.wixsite.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
CC Weathering Services Facebook Page: https://www.facebook.com/ccweatheringservices/
Posted
Guest user
Posted
Inactive Member
Max
Port Elderley
Port Elderley
Posted
Guest user
Also running around in circles and jumping to conclusions. Where's me coat?
Yes of course, those excercises as well exclam:
CU Sat ( all day) or Sun ( morn only) at the Exhibition - remember that T- shirt. I will wear it on Sunday.
Posted
Inactive Member
Max
Port Elderley
Port Elderley
Posted
Guest user
More plastering along the road - even though I had varnished the Scalescenes tarmac, so much water fromn cleanup, ruined the paper surface so I borrowed a grey paint & re-did the entire road - will need to have New Roadworks signs.
Tons more to do but now I have spread my "skills" elsewhere at Barnstable.
a platform is to be fitted in this space.
more photos later as it is built.
Posted
Full Member
Posted
Guest user
loading gantry springs to mind???
:cool:
Posted
Inactive Member
Max
Port Elderley
Port Elderley
Posted
Guest user
Posted
Guest user
For a 3 car DMU
Some of the stone work added. Brickyard paper - matches the warehouse platform near the curves & overway bridge
Posted
Full Member
Your lamination just reminded me it was something I wanted to know!
Posted
Guest user
Plastic to MDF( smooth face ) - Supa glue or Tarzan's Grip or similar contact glue for any face of MDF.
Quite possibly even the thin double-sided tape - I think Mr Rail uses that process.
Posted
Full Member
Posted
Guest user
The edge pavers done in LOTUS 1-2-3 spreadsheet, slightly grey colour, 11 slabs per strip
Posted
Guest user
All paper surfaces to be sprayed again with matt varnish tomoorow.
Station building in temporary location, fencing to be added, etc but now passengers will have somewhere to get off safely instead of jumping down to the ground.
1 guest and 0 members have just viewed this.