Newton Regis, it'll never be finished, hopefully!
Posted
Full Member
A GWR journey through the 1920s and 30s
Currently building baseboards and the drill battery has just expired, rats. The other battery died a while ago and I can't get Screwfix to deliver a new drill to France, double rats! Decent drills are available here, but at silly prices and not in a good way.Okay, frustrated rant over. Time for a sarnie while some juice gets into the battery.
More later.
Bill
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
To add to the night curfew, we’ve been back on lockdown since Friday morning, so I made what I thought would be a quick trolly dash on Thursday, as DIY stores are now closed. Both the garden centre and the DIY shops were heaving, so I concentrated on filling just my Briccoman trolly with more plywood, timber, adjustable feet and screws, to ensure I can complete the backscene and legs, as well as the baseboards, while non-essential shops are closed for at least 4 weeks.
Lightweight modular baseboards have always seemed a good idea to me for several reasons. My standard size will be 1200 x 600mm with 15 x 100mm high sides and braces, with 9mm tops. I’m building the branch in advance of the main line, as it has just 6 points, and 3 boards, meaning I can practise all the new fangled ways of doing things since my previous layout 40 years ago.
Here’s the first board’s framework, almost ready for screwing and gluing. The sides are deep enough to mask the slow action point machines, while the holes will help reduce weight, as well as enabling easy cable routes. I’ll assemble it next and then see if the new drill arrives before the old battery finally gives up the ghost!
Bill
Last edit: by Longchap
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
I know exactly what you mean about prices for "outilles" in France. Some years ago, I bought an excellent Makita drill here - on offer with a smaller drill thrown in although the package still only had 2 batteries.
Both are very good drills, as one would expect from Makita. I recommended the particular drill to my brother in UK. He bought it for just over 50% of what I'd paid - and it wasn't on offer !!
That was the last power tool I ever bought in France !
Regarding batteries, I did buy a replacement for a Dewalt nail gun from an online retailer here. So far, it's proved to be a good battery although, as I don't spend 24/7 using a nail gun, I can't say how long it will last. It was certainly much cheaper than the Dewalt offering ! If you're likely to need replacement batteries in the future, I can give you the suppliers details ……
'Petermac
Posted
Full Member
You might want to add a hole for the DCC control panel/plug at the front. Universal Throttle Panel (UTP). 6mm is not very much meat for screws, if you use chocblocks it helps if you have an additional piece glued in to give 18mm.
Nigel
©Nigel C. Phillips
Posted
Full Member
Terry
Posted
Full Member
Thanks Peter and yes, it’s good to be building something and having sufficient materials to keep busy during the lockdown.That looks very professional Bill. You'll be pleased to finally be putting hammer to nails.
I know exactly what you mean about prices for "outilles" in France. Some years ago, I bought an excellent Makita drill here - on offer with a smaller drill thrown in although the package still only had 2 batteries.
Both are very good drills, as one would expect from Makita. I recommended the particular drill to my brother in UK. He bought it for just over 50% of what I'd paid - and it wasn't on offer !!
That was the last power tool I ever bought in France !
Regarding batteries, I did buy a replacement for a Dewalt nail gun from an online retailer here. So far, it's proved to be a good battery although, as I don't spend 24/7 using a nail gun, I can't say how long it will last. It was certainly much cheaper than the Dewalt offering ! If you're likely to need replacement batteries in the future, I can give you the suppliers details ……
Despite a new drill winging its way to my workshop, I’m keen to source a new replacement battery for the old Dewalt, so I can keep it in reserve. I found trying to source a reliable battery with so many poor reviews a minefield, so I gave up. Do your suppliers have a website? I’d be pleased to receive a PM with details.
Many thanks,
Bill
Last edit: by Longchap
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
Thanks Nigel and I will need to fit my NCE socket panel to the front fascia, which shouldn’t be a problem when I decide just where to place it. The frames are 15mm thick, so should be fine, although I’ll use a pattress if necessary.Hi Bill,
You might want to add a hole for the DCC control panel/plug at the front. Universal Throttle Panel (UTP). 6mm is not very much meat for screws, if you use chocblocks it helps if you have an additional piece glued in to give 18mm.
Nigel
Bill
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
Thanks Terry, it’s commercial name is Powerplex Plus, FSC certified and is red hardwood faced over an eucalyptus core and comes from Holland. I’m using 15mm thickness for the frames, 10mm for the tops and 5mm for the backscenes.I have timber for the legs and braces, adjustable feet, and also alignment dowells in the post from DCC Concepts, so am looking forwad to some more relaxing carpentry.That looks very neat Bill. What kind of plywood are you using?
Terry
I’m using power tools for all cutting and drilling and despite a temporary setback with an ailing cordless drill, working with this product is a pleasure.
Bill
Last edit: by Longchap
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
'Petermac
Posted
Full Member
Given the size of the layout I would plan on having a couple of UTP terminals plus at least one hand controller with a flexible lead so you can do walk around rather than being fixed in one location.
Nigel
©Nigel C. Phillips
Posted
Full Member
I agree entirely with the need for two UTPs and when I upgrade my NCE Power Cab with the 5amp booster system to run the larger layout, it comes with an additional throttle. For now though, I’ll build and test the branch with my 2amp Power Cab.
Bill
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
Fingers crossed for having the three boards built, up on their feet and all joined together before the weekend.
More soon, be good,
Bill
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
Keep well
Posted
Full Member
How's the new drill ? If it's anything like the last one I bought, they're a bit like model railways - they've come on in leaps and bounds over the years !! I thought I'd arrived in the space age when I bought my first cordless drill - no more tripping over extension cables or being tethered to the nearest power socket. Then, when eventuallyI replaced it, the new one made it seem as if it had come from the ark.
'Petermac
Posted
Full Member
Soon,
Bill
Last edit: by Longchap
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
Havent heard from Hattons yet but I expect that I wont see mine much before Christmas.
Posted
Full Member
I haven’t weighed them Peter, but they are light and easy to handle. I bought factory produced sheet sizes, so the tops are single 1200 x 600 x 10 mm thick sheets and I rip the sides and ends with the circular saw from 15mm thick x 1200 x 600 and 600 x 400mm long boards respectively, so the only waste are the 50mm diameter holes and 15 x 100mm strips from the ends and braces, if I can’t find a use for them!
While not quite standing on their feet, the boards are now ready and eager for a coat of paint and to begin to resemble something looking like a model railway.
I’m using a jig to mark consistent locations of threaded sockets and bolts for the legs, thus making the legs a universal fit for any baseboard. I must find a safe home for the jig, so I can find it when the mainline boards are made. Now where did I put the ‘Where did I put it Book’?
The alignment dowels were a snip to fix and I was pleased to learn that Peco’s unifrog points need no wiring enhancements before laying. The frog is pre-wired, so the wire just needs bringing down below the baseboard for attachment to a polarity switched power supply from the point motor. I just hope it’s as easy as it sounds, bearing in mind the slow motion point motors have bulit in polarity switching.
I’ve legs to make up, then with the boards at a convenient working height, I can set out some track and determine just how long this branch is going to be. What fun!
Bill
Last edit: by Longchap
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
Very exciting to see a new layout developing from scratch!
Michael
Posted
Full Member
The sun is shining today, so as soon as I cut the grass, I’ll be back tramping the boards in getting the trackwork planned out in detail. Not enormous pressure, but I now have the Tortoise point motors ready for dispatch from Suffolk.
On-y-va!
Bill
Last edit: by Longchap
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
Posted
Full Member
I have point motors on their way and have now added a range of static grass fibres, together with associated adhesives. As soon as I get the track and electrics laid and tested, I want to get some scenery on the boards before adding ballast or man made items.
On reflection, there’s probably not an issue with long scenics delivery, as I have no misconception of just how long the trackwork and electrics might take me, this being the first time for experimenting with dark things such as DCC electrics (thanks though John), with unifrog points, point motors and then the big one, the control panel. Big swallow!
I freely admit that I’ve never took the time to really understand electrical theory and practice, although I’m perfectly capable at moving mains sockets, switches, etc and am very careful. It will be a while then, before you may see any great progress other than seeing some track going down, although I’m reading up on how to get things done, so fingers crossed.
I have however finished the boards, joined and painted them and set out the station run round which determines the overall dimensions. The boards length is currently 2 400mm (8 feet, give of take) and to model the station access, I’ll add an additional 400mm board, so just a little more woodwork, before laying some track.
TTFN,
Bill
Last edit: by Longchap
At 6'4'', Bill is a tall chap, then again, when horizontal he is rather long and people often used to trip over him! . . . and so a nickname was born :)
1 guest and 0 members have just viewed this.