Peco Electrofrog L/ H point
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Appears to be dead
Hi Chris. When I replied to your “ cleaning before soldering “ it is just like me not to read the suggestion properly.I wrote/ meant to write? Cleaning the soldered joints. That is to prevent corrosion from occurring in future.Best wishes Kevin
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1632.jpg)
Full Member
Old fashioned paint stripper or brake fluid that contains methylene chloride dissolves epoxy (as will a 50:50 mix of methylene chloride and methanol, although most of use do not have those chemicals to hand). Wear gloves when applying. You will however dissolve the sleepers as well. Make a note to self - use PVA for gluing down sleepers. A wet cloth overnight softens it up.
Nigel
©Nigel C. Phillips
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/269.jpg)
Inactive Member
I've been in this place - where I can't see the forest for the trees.
Good advice from yourself. Strip it down and rewire it. You WILL find the problem.
Cheers :cool:
Max
Port Elderley
Port Elderley
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/269.jpg)
Inactive Member
PS :off topic have you moved house yet? Best wishes Kevin
Yep. We Moved in September.
We're still opening boxes. :oops:
Max
Port Elderley
Port Elderley
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
1 guest and 0 members have just viewed this.