Going large - building large layouts
Posted
Full Member
It is my intention to float a shopping list to Hattons and Rails to see who is prepared to offer a discount for a bulk buy - if I can pursuade them that I am not opening a rival model shop!!!! I might also ask Peco direct for a quote, especially given the number of yards of plain track I also need.
Who dares wins…………
p.s. Sorry Sol, a "Bex" - I thought that was a type of lager
Barry
Shed dweller, Softie Southerner and Meglomaniac
Posted
Full Member
My post of 30th April 2019 shows the intended trackplan with all 125 turnouts. A good number are located in the storage area where I want to be able to select a track and just drive a train out. This luxury has cost me about 2 dozen sets of points!! …..
Barry
What? That's almost twice the number on my entire Westown layout. Are you really sure about this "Going Large" thing? :twisted:
Colin
Posted
Site staff
[user=2006]Barry Miltenburg[/user] wrote:My post of 30th April 2019 shows the intended trackplan with all 125 turnouts. A good number are located in the storage area where I want to be able to select a track and just drive a train out. This luxury has cost me about 2 dozen sets of points!! …..
Barry
What? That's almost twice the number on my entire Westown layout. Are you really sure about this "Going Large" thing? :twisted:
Colin
Currently my empire runs 95 turnouts with another 6 being added.
Ron
NCE DCC ; 00 scale UK outline.
NCE DCC ; 00 scale UK outline.
Posted
Full Member
With apologies for the sideways pictures (iphone photos ALWAYS do this to me!), I present the results of Dr Beechings work in the Yarslow area. The first photo shows the baseboard framework being dismantled. I used 2 inch x 2 inch (nominal) for the main spars and 2 inch x 1 inch for the cross bracing every 12 inches. This supported a 9mm MDF top which did not warp at all during its 8 year life. Legs were 2 inch x 2 inch.
The second photo shows the benefit of asking how to lift ballasted track. Thanks to the inputs of the guys on the forum, I have rescued all but 1 section of track. The bit I lost was on about its 3rd layout anyway so nothing lost really. All of the pointwork was saved along with the vast majority of wiring and, of course, all of the point motors. The short bits of track on the shelf in the first photo is the "junk track" pile - 5 short sections!!
The non-scenic side of the layout was all Peco Settrack and this will be passed on to my grandson although I might hold back the curved points as he is only 8 and I am not sure I can explain the geometry of them!!
I estimate that I will not have trains running now for about 2 years as the house move and inevitable renovation progress. I will have access to my day-to-day tools but not the bigger stuff like airbrushes, soldering iron etc. With this in mind, I am keen to get into making a few Parkside wagon kits and maybe even some more Ian Kirk coaches if I can find them.
Its already feeling strange to have broken Yarslow down and packed everything away. The mental health benefits of a layout are, I am finding, somewhat underestimated.
Barry
Shed dweller, Softie Southerner and Meglomaniac
Posted
Legacy Member
At the time it was a mental kick in the teeth although i knew at some point it would occur.
All i can say is myself and others have been through it and once you have your new place that layout enthusiasm soon bounces back.
Brian
OO gauge DCC ECOS Itrain 4 computer control system
Posted
Full Member
I have now completely dismantled the layout and most of it has gone to the local recycling centre aka the tip.
The pile of saved track has been cleaned up and totals 72 pieces of re-usable lengths. Most are 36 inches and about 20% are over 24 inches. There are also a dozen shorter sections and I rescued about 40 12-inch sections from the old loco cartridges. Every bit saved is one less bit to buy.
Despite all I hear about Brexit (and everything that's blamed on it) the house sale is warming up and we have bought a small flat as a foothold in Southport. The idea is to move from here to the Southport flat and then find a house/layout room combination that suits at our leisure. It takes all the stress out but I reckon I will be lucky to see trains running within 2 years.
That doesn't bother me as I continue to tinker with the detailed design and I will put a series of You Tube videos together telling the story of the design. The idea is that I have made loads of mistakes to get the design to the current state and if that helps others avoid making the same ones, all well and good.
The hardest thing is not having my library - everything is packed so I have no reference material to hand at all. That hit me this week when I noticed that Hattons had a number of Mk I TSO and SO coaches for sale at bargain prices. Ordinarily I would dive into Steve Banks' books to review how these vehicles were used and whether it would be worth getting some. No can do
Ah well, at least it saved me some money!!
A final thought has hit me. Yarslow is a name constructed from "Yarmouth" where we have a house on the Isle of Wight and "Hounslow" which is the London Borough where I live. If I move to Southport, do I have to change to Yarport or even Southmouth!!!
Barry
Shed dweller, Softie Southerner and Meglomaniac
Posted
Site staff
Ron
NCE DCC ; 00 scale UK outline.
NCE DCC ; 00 scale UK outline.
Posted
Full Member
You could have "Livermouth", "Yarpool" or "Yarsey" as being in the same sort of area……………………….
'Petermac
Posted
Full Member
Cheers
Andy
Andy
Posted
Full Member
Re iPhone photos' orientation, my solution is to email the photo to my non Apple PC, open the photo in whatever photo editor, rotate as required and do a "Save As" to save with new name. That fixes it and since I'm posting from my desktop there's not that much extra work involved anyway.
Colin
Posted
Full Member
Shed dweller, Softie Southerner and Meglomaniac
Posted
Full Member
'Petermac
Posted
Legacy Member
"Miltenburg"
Brian
OO gauge DCC ECOS Itrain 4 computer control system
Posted
Full Member
'Petermac
Posted
Full Member
I only took the photo with the phone because I have packed the camera somewhere and couldn't find it when I wanted it!! I have now located it so should not suffer from malrotationalism any more.
Brian - Miltenberg is a town in Germany that I have been to ("berg" = "mountain" in German). Probably a bit too germanic but a nice idea all the same.
Guys - I have been contemplating the name thing and will probably stick with Yarslow although South Yarport sounds good. The first half dozen layouts I built were all called "Midworth" simply because I liked the name and I'm a creature of habit. The other proposed layout names (Highmarsh and Trinity Square) have also been with me for decades - its funny how some things just stick.
Finished stripping out the old Yarslow shed today so nothing remains of the layout other than the entire interior is painted sky blue and there are bits of scenic flock stuck to the backscene which I can't get off. I have rescued a load of 2" x 2" (nominal) timber lengths that look useful and about 200 screws that held it all together.
On a more constructive note, I have found all manner of tools and stuff that I have lost over the past few years - found down behind baseboards and piles of shed contents.
I'm also saving a small fortune by not continuously buying wagons and stuff!
We are heading north again in a couple of weeks to continue the search for a railway room/house. During recent discussions, I laid out 24ft x 16ft in our present garden just to get Mrs M used to the idea of the actual size. I am still feeling somewhat guilty that we have found loads of lovely houses but nothing yet with the right space for the layout. I have started wondering whether I am being too ambitious but Mrs M simply said "We are not compromising - we'll find something to take the layout".
She's an angel……….
Barry
Shed dweller, Softie Southerner and Meglomaniac
Posted
Full Member
Last edit: by Passed Driver
Staying on the thread Kevin.
Posted
Full Member
These days, I have to find my metric converter app on the phone and my reading glasses to work out whether I need 50mm or 44mm timber.
I must be getting old.
Barry
Shed dweller, Softie Southerner and Meglomaniac
Posted
Full Member
Those old guys in brown coats were usually just as useless as their modern day equivalents. Mill shops and speciality lumber stores excepted, where they make what they sell.
Nigel
©Nigel C. Phillips
Posted
Full Member
Colin
Last edit: by Colin W
Posted
Full Member
1.75" x 1.75" started life as 2" x 2" but, in planing, they removed 0.25". I don't think it is now but, several years ago it was specified as PSE - planed, squared and edged. In the old days, the planing, squaring and edging was done by the carpenter on site. Except in construction, hardly anyone uses rough sawn timber these days - we all like our smooth, neat square timber.
'Petermac
1 guest and 0 members have just viewed this.