Kevin's Inglenook Junction
Posted
Site staff
Two Planks Become One
Ok Kevin but when you connect them does one go through a 180% turn to conect to the other ? Instand reverse wiringAre there points on both boards ? If so do the red and black wires go to the same contact on your DPDT switches ?
I.E. board A red goes to contact 2 black goes to contact 4. . . Board B red goes to contact 2 black to contact 4 ?
Or on one board is it Red 2 Black 4 but the other board Red 4 Black 2 ? Doesn't matter on individual boards but soon as you connect…
I'ts things like this we need to work through slowly to find a cure. Let me know when you have done step one. . Eat the bana. . . No thats step 2 :roll:
I'm trying to figure out what someone has done with the lighting and power wires on an old mainline diesel using multi coloured telephone wires so I have multi coloured spots before me eyes. Red and black is easy peezy !!! :shock:
Cheers Matt
Wasnie me, a big boy did it and ran away
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
Posted
Full Member
Best wishes Kevin
Staying on the thread Kevin.
Posted
Site staff
Wasnie me, a big boy did it and ran away
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
Posted
Site staff
Wasnie me, a big boy did it and ran away
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
Posted
Full Member
Staying on the thread Kevin.
Posted
Site staff
Wasnie me, a big boy did it and ran away
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
Posted
Legacy Member
Brian
OO gauge DCC ECOS Itrain 4 computer control system
Posted
Full Member
Staying on the thread Kevin.
Posted
Site staff
Wasnie me, a big boy did it and ran away
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
Posted
Full Member
Staying on the thread Kevin.
Posted
Site staff
Cheers
Matt
Wasnie me, a big boy did it and ran away
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
"Why did you volunteer ? I didn't Sir, the other three stepped backwards"
Posted
Full Member
It doesn't matter two hoots where the bus wires are - front or back - it does matter which rail (on the track) is "black" and which is "red" and that all the connections thereto are the right "colour" and from the corresponding bus.
'Petermac
Posted
Full Member
Staying on the thread Kevin.
Posted
Full Member
Hi Petermac. Thank you. In a short while I am going to take some photos of the wiring. Best wishes Kevin
:thumbs
'Petermac
Posted
Full Member
Nigel
Edit: Forget that, a Banana plug only has one wire :oops:
©Nigel C. Phillips
Posted
Full Member
Staying on the thread Kevin.
Posted
Site staff
Ron
NCE DCC ; 00 scale UK outline.
NCE DCC ; 00 scale UK outline.
Posted
Site staff
Then when you turn the boards so B meets A, then of course there will be a short circuit !!
Ron
NCE DCC ; 00 scale UK outline.
NCE DCC ; 00 scale UK outline.
Posted
Full Member
Michael
Posted
Site staff
Ron
NCE DCC ; 00 scale UK outline.
NCE DCC ; 00 scale UK outline.
1 guest and 0 members have just viewed this.