laying track direct onto baseboard
Posted
#203736
(In Topic #11213)
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
bending track pins and making noise
Hi Everyone 40 (very) odd years ago I was a master at bending track pins, and I am still a master:oops:, there was a lot of noise when the trains were running![:cry:](https://yourmodelrailway.net//themes/default/images_custom/cry.gif)
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/606.jpg)
Site staff
![Sol is in the usergroup ‘Super-moderators’ Sol is in the usergroup ‘Super-moderators’](https://yourmodelrailway.net//themes/default/images/cns_rank_images/mod.png)
Ron
NCE DCC ; 00 scale UK outline.
NCE DCC ; 00 scale UK outline.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/644.jpg)
Full Member
If you glue down your track you dont need to use pins, you can use them to hold the track while the glue dries and then remove them, just dont push them all the way in.
All of my track has been glued down without any use of a pin.
I have a bag of pins as they make good door knobs when scratchbuilding.
Cheers
Andy
Andy
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/312.jpg)
Full Member
IMO the only saving grace of Sundeala was that its open structure tended to absorb sound. Oh, and moisture and paint and split tea et cetera!
Plenty of underside cross bracing helps to stop the baseboard becoming a 'drum-skin' as does gluing pieces of cork table mat to any open underside areas with contact adhesive, much as that piece of black sticky stuff under a stainless steel sink stops running water sounding like a giraffe peeing on a tin shed roof.
Doug
Grumpy, after having stripped and replaced chair/settee cushion covers. So there. Bum.
'You may share the labours of the great, but you will not share the spoil…' Aesop's Fables
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
"Beer is proof that God loves us and wants us to be happy" - Benjamin Franklin
In the land of the slap-dash and implausible, mediocrity is king
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/772.jpg)
Full Member
HTH
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1033.jpg)
Site staff
![spurno is in the usergroup ‘Super-moderators’ spurno is in the usergroup ‘Super-moderators’](https://yourmodelrailway.net//themes/default/images/cns_rank_images/mod.png)
Regards
Alan
Born beside the mighty GWR.
Alan
Born beside the mighty GWR.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/321.jpg)
Full Member
In my case, I deliberately mounted the track directly to the baseboards for the visible sections of the London Underground lines, but on cork underlay for the rest. I wanted the underground trains to roar and rumble, like the real ones. The direct mounting also allows more audible clickety-clack noises at track joints.
Jeff Lynn,
Amateur layabout, Professional Lurker, Thread hijacker extraordinaire
Amateur layabout, Professional Lurker, Thread hijacker extraordinaire
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1632.jpg)
Full Member
Use cork or foam underlay glued to the baseboard, glue the track to the underlay. Track pins are not necessary. Position the track with regular pins either side of the rails between the sleepers. Baked bean tins are ideal for getting the right weight while the glue sets. Empty ones filled with concrete are even better.
One other way to get the "rumble" down is to use acoustic foam underneath the baseboard. Or high density acoustic panels used in cars glued to the underside. The idea is to stop the baseboard acting like a drum.
Nigel
©Nigel C. Phillips
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1801.jpg)
Full Member
Staying on the thread Kevin.
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1775.jpg)
Full Member
Cheers
Ron
Proper Preparation makes for Perfect Performance!!
http://yourmodelrailway.net/view_topic.php?id=13331&forum_id=21
http://yourmodelrailway.net/view_topic.php?id=13331&forum_id=21
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/269.jpg)
Inactive Member
Max
Port Elderley
Port Elderley
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/19.jpg)
Full Member
cheers
Marty
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/1632.jpg)
Full Member
Hi Kevin,Hi Nigel The "Lead" fishing weights were redundant and available, and I don't mix concrete, now that I have the "Bit between my teeth", I will push ahead with the Shunting Plank test bed. All the ideas including "Track Laying", "Point Control", etc., etc., can then be proven, spending my time between "Harvest" and Viaduct " building, excuse the old term "playing trains", as I don't know the correct term. all the best Kevin
Go ahead and play trains (Play: engage in an activity for enjoyment and recreation). I had a great time playing trains over the weekend on an 80' foot layout. Fast clock, operating schedules, way bills for the freight cars and threading the freights around the varnish.
If you can find it, "Playing with trains: A passion beyond scale" by Sam Posey is a great read written by a serious modeler. Playing trains is not just for 6-year olds and Thomas.
I like the idea of lead weights, I'll give it a try (recycled lead shot), although baked beans work OK.
Nigel
©Nigel C. Phillips
Posted
![Avatar](https://yourmodelrailway.net//uploads/cns_avatars/644.jpg)
Full Member
I use map pins or weights to hold the track while it dries.
I am not bothered about the noise, although while playin…. I mean testing I do not have much noise but then I only have baseboard where I have track at this point.
Last edit: by Campaman
Cheers
Andy
Andy
1 guest and 0 members have just viewed this.